thoweh@species8472 $>hinv -mv Location: /hw/module/1/slot/n1/node MODULEID Board: barcode K0030179 part rev IP31PIMMR12KS Board: barcode KRH959 part 030-1423-002 rev G IP31 Board: barcode KSB420 part 030-1523-001 rev C 8P12_MPLN Board: barcode MFM465 part 030-1535-001 rev C Location: /hw/module/1/slot/n2/node IP31 Board: barcode KSB458 part 030-1523-001 rev C IP31PIMMR12KS Board: barcode KRH935 part 030-1423-002 rev G Location: /hw/module/1/slot/n3/node IP31 Board: barcode KSB421 part 030-1523-001 rev C IP31PIMMR12KS Board: barcode KRH853 part 030-1423-002 rev G Location: /hw/module/1/slot/n4/node IP31 Board: barcode KSB362 part 030-1523-001 rev C IP31PIMMR12KS Board: barcode KRH933 part 030-1423-002 rev G Location: /hw/module/1/slot/r1/router ROUTER_IR1 Board: barcode HKJ446 part 030-0841-003 rev B Location: /hw/module/1/slot/r2/router ROUTER_IR1 Board: barcode HKJ224 part 030-0841-003 rev B Location: /hw/module/1/slot/io2/pci_xio PCI_XIO Board: barcode GFS776 part 030-1062-002 rev D Location: /hw/module/1/slot/io7/fibre_channel FIBRE_CHANNEL Board: barcode GWW217 part 030-0927-003 rev C Location: /hw/module/1/slot/io10/hippi_serial HIPPI_SERIAL Board: barcode JHV649 part 030-0968-004 rev F Location: /hw/module/1/slot/io6/mscsi MSCSI Board: barcode GTF796 part 030-1243-001 rev J Location: /hw/module/1/slot/io1/baseio BASEIO Board: barcode LKG677 part 030-1124-003 rev A 8 400 MHZ IP27 Processors CPU: MIPS R12000 Processor Chip Revision: 3.5 FPU: MIPS R12010 Floating Point Chip Revision: 3.5 CPU 0 at Module 1/Slot 1/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 1 at Module 1/Slot 1/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 2 at Module 1/Slot 2/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 3 at Module 1/Slot 2/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 4 at Module 1/Slot 3/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 5 at Module 1/Slot 3/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 6 at Module 1/Slot 4/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 7 at Module 1/Slot 4/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa Main memory size: 15872 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 8 Mbytes Memory at Module 1/Slot 1: 3584 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Bank 2 contains 256 MB (Standard) DIMMS (enabled) Bank 3 contains 256 MB (Standard) DIMMS (enabled) Bank 4 contains 512 MB (Standard) DIMMS (enabled) Bank 5 contains 512 MB (Standard) DIMMS (enabled) Bank 6 contains 512 MB (Standard) DIMMS (enabled) Bank 7 contains 512 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 2: 4096 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Bank 3 contains 512 MB (Standard) DIMMS (enabled) Bank 4 contains 512 MB (Standard) DIMMS (enabled) Bank 5 contains 512 MB (Standard) DIMMS (enabled) Bank 6 contains 512 MB (Standard) DIMMS (enabled) Bank 7 contains 512 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 3: 4096 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Bank 3 contains 512 MB (Standard) DIMMS (enabled) Bank 4 contains 512 MB (Standard) DIMMS (enabled) Bank 5 contains 512 MB (Standard) DIMMS (enabled) Bank 6 contains 512 MB (Standard) DIMMS (enabled) Bank 7 contains 512 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 4: 4096 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Bank 3 contains 512 MB (Standard) DIMMS (enabled) Bank 4 contains 512 MB (Standard) DIMMS (enabled) Bank 5 contains 512 MB (Standard) DIMMS (enabled) Bank 6 contains 512 MB (Standard) DIMMS (enabled) Bank 7 contains 512 MB (Standard) DIMMS (enabled) ROUTER in Module 1/Slot 2: Revision 2: Active Ports [3,4,5,6] (enabled) ROUTER in Module 1/Slot 4: Revision 2: Active Ports [3,4,5,6] (enabled) Integral SCSI controller 2: Version Fibre Channel QL2200A, 33 MHz PCI Integral SCSI controller 3: Version Fibre Channel AIC-1160, revision 2 Integral SCSI controller 5: Version QL1040B (rev. 2), differential Integral SCSI controller 6: Version QL1040B (rev. 2), differential Integral SCSI controller 7: Version QL1040B (rev. 2), differential Integral SCSI controller 8: Version QL1040B (rev. 2), differential Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) CDROM: unit 6 on SCSI controller 0 Integral SCSI controller 1: Version QL1040B (rev. 2), single ended Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2 IOC3/IOC4 serial port: tty1 IOC3/IOC4 serial port: tty2 Gigabit Ethernet: tg1, module 1, PCI bus 0 slot 0 port 0 Gigabit Ethernet: tg2, module 1, PCI bus 0 slot 0 port 1 HIPPI-Serial adapter: unit 0, in module 1 I/O slot 10 Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Origin PCI XIO board, module 1 slot 2: Revision 3 PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 0 PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x2200) PCI slot 1 Origin FIBRE CHANNEL board, module 1 slot 7: Revision 3 Origin MSCSI board, module 1 slot 6: Revision 3 Origin BASEIO board, module 1 slot 1: Revision 4 PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0 PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0 PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 IOC3/IOC4 external interrupts: 1 HUB in Module 1/Slot 1: Revision 6 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 2: Revision 6 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 3: Revision 6 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 4: Revision 6 Speed 100.00 Mhz (enabled) IP27prom in Module 1/Slot n1: Revision 6.156 IP27prom in Module 1/Slot n2: Revision 6.156 IP27prom in Module 1/Slot n3: Revision 6.156 IP27prom in Module 1/Slot n4: Revision 6.156 IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156 thoweh@species8472 $>